Flush Mount Ceiling Light, 12 inch 15W LED Dimmable Lighting Fixture, 3000K Warm White, Oil Rubbed Bronze Fihished, ETL Listed for Kitchen, Hallway, Bedrooms (Metal Body and Acrylic Shade)

Purchased 11/2021 & it still makes me smile 🤗. As Floridians we feel obligated to have ceiling fans in every room. Well, I realized one day we really weren't using them. Plus, in our downsized condo, it made the ceiling seem so low. I also have a husband who really likes lots of a light, but fan lights don't do that. This fixture cured all my problems. It's sleek, minimalistic & pretty. The rooms look taller and more open now. I love the little bit of detail in the cutouts around the edges, but they're not ostentatious. It works like a charm. We have an on a dimmer, and I just love it 3 1/2 yrs. later. Ours is all white & is centered over our main dining/work area. Just wanted to share our pleasure of this little cutie 💓 with you shoppers. Also, I feel it is a very reasonable priced item. Be Blessed.🏖 Kj in Tampa Bay 🙋🏼‍♀️

Very elegant & brightens the room nicely. Remote is very handy to have.

Looks good, easy to install, can adjust the different settings easily by removing the plastic dome, not the whole fixture. It took almost a month to get it but that’s what was predicted.

This light fixture looks great in the 2 small bedrooms (11ft x 11ft) I installed them in. They put out a suffcient amount of light for those rooms and the quality of light is soft, warm, and natural looking.The outer shell housing is made of metal. Stiff and lightweight. If you mask off the electronics, I don't see why you couldn't repaint it a different color if you were so inclined.The light cover is made of plastic. You simply twist it clockwise to lock it into place. Twist counter-clockwise to remove it. Simple enough.I rated this 4 stars because of some issues I had with the install. If you see in the pictures, the fixture had 2 sets of slots for the screws to go through. Which one you use is dependent on the size of the electrical box you're installing the fixture into. In my case, the hole spacing in my electrical box required me to use the inner most screw slots on the fixture. That shouldn't have been a problem, but I came across 2 issues:1) the heads of the provided hardware screws were too big to go into the slot opening. The idea of that you're supposed to first drive the screws into the electrical box mostly in and leaving a bit of them sticking out. Then raise the fixture housing, lining up the screw heads with the slot openings, push up, twist the housing, then drive the screws in the rest of the way to lock the fixture in place. I tried that only to realize the heads of the screws wouldn't fit into the cutouts of the housing. So had to undo all the wire connections so I could move the housing out of the way so I could remove the screws.2) so no big deal about issue #1, I'll just line up the housing with the screw holes (after making the wire connections) and then drive the screws in. But it wasn't as easy as it should have been. The problem I had was that the LED driver control box (big white circular box in the fixture) sits very close to those screw slots I needed to use. Additionally the wires coming out of the LED driver are also right next to those slots. It was a delicate operation trying to drive those screws in while they rubbed against the LED driver box and the thin delicate wires coming out of the box. Once in it was all good, but what a pain that was, especially since I'm working on something above my head.After it was all installed, though, the light looked great. Since I bought the 2 pack, lessons learned from the first install made the second install much faster. Hopefully it helps you too.Oh, and these are dimmable light fixtures, but I did not use dimmer switches so I cannot comment on the quality of the dimming feature. At full power, I didn't think these lights were over powering. They were just right.

Love it

Beautiful

Great look, very Brite, also great to be able to match the color of the LED's to the rest of the area

I really liked the fixture when I got them and installed them… however one of the 2 lights started to have problems when I turned it on (flickered then went out) and now it won’t come on at all… I purchased these lights in 2022 and it’s in a spare bathroom.